Avocent Advanced Console Server ACS 6000 Manual do Utilizador

For Technical Support:www.avocent.com/support590-770-501B Cyclades® ACS 6000Command Reference Guide

viii Cyclades ACS 6000 Advanced Console Server Command Reference Guide

1CHAPTER1Introduction, Navigation and CommandsThe Cyclades ACS 6000 advanced console server is a 1U appliance that serves as a single point for access

2 Cyclades ACS 6000 Advanced Console Server Command Reference GuideFigure 1.1: ACS 6000 Advanced Console Server PortsTable 1.1: ACS 6000 Advanc

Chapter 1: Introduction, Navigation and Commands 3Access Options and How to Log Into the CLIThe CLI utility can be accessed in the following wa

4 Cyclades ACS 6000 Advanced Console Server Command Reference GuideFor example, in the Web Manager, user configuration is done when an administ

Chapter 1: Introduction, Navigation and Commands 5A prompt like the following appears at each level:--:- appliance_settings cli->NOTE: CLI c

6 Cyclades ACS 6000 Advanced Console Server Command Reference GuideParametersSome CLI commands take parameters. If you press Tab Tab after a co

Chapter 1: Introduction, Navigation and Commands 7 | : or () : groupCLI Command SetNOTE: Most of the commands work from any location when the

8 Cyclades ACS 6000 Advanced Console Server Command Reference GuideSyntax:--:- units cli-> add <Path> Example:--:- units cli-> add

Chapter 1: Introduction, Navigation and Commands 9--:- overview cli->pwdDisplay the path to the current level (print working directory).Synt

FCC Warning StatementThe Cyclades ACS advanced console server has been tested and found to comply with the limits for Class A digital devices, pursuan

10 Cyclades ACS 6000 Advanced Console Server Command Reference GuidePassword:-or-Type the hotkey to suspend the connection:Ctrl + zshareConnect

Chapter 1: Introduction, Navigation and Commands 11NOTE: You must log into the CLI as root to have full control over the local directory path.

12 Cyclades ACS 6000 Advanced Console Server Command Reference Guideshow/lsShow the available directories, commands or parameters at the curren

Chapter 1: Introduction, Navigation and Commands 13--:- units cli-> cd power_management/management/<PDU_ID>/outlet_table--:- outlet_ta

14 Cyclades ACS 6000 Advanced Console Server Command Reference GuideFOOD HUGH SKI ALMA LURK BRADSpecial Multi-session CommandsThe following com

Chapter 1: Introduction, Navigation and Commands 15--:- units cli -> inspectdbuf overview/appliance_data_loggingThe following commands are a

16 Cyclades ACS 6000 Advanced Console Server Command Reference GuideCLI Equivalent Actions to Web Manager Checkbox SelectionNOTE: The following

Chapter 1: Introduction, Navigation and Commands 17 [X] get_domain_from_dhcpv68. Enter commit.

18 Cyclades ACS 6000 Advanced Console Server Command Reference Guide

19CHAPTER2Port Access and Configuration ExamplesBy default, all serial ports and the AUX/Modem port are disabled. The administrator must enable and co

Cyclades® ACS 6000 Advanced Console ServerCommand Reference GuideAvocent, the Avocent logo, The Power of Being There, DSView and Cyclades are register

20 Cyclades ACS 6000 Advanced Console Server Command Reference GuideView Information About the Console Server and Connected DevicesWhen a regul

Chapter 2: Port Access and Configuration Examples 21To view information about the console server and connected devices:1. Log into the CLI and

22 Cyclades ACS 6000 Advanced Console Server Command Reference Guide name: myPDU port: 3/1 type: PM20i|30A status: 3|20 actio

Chapter 2: Port Access and Configuration Examples 23Last login: Tue Oct 2 13:09:04 2007 on :0Linux fremont-techpubs 2.6.15-28-386 #1 PREEMPT W

24 Cyclades ACS 6000 Advanced Console Server Command Reference Guide8. Enter set port_settings/serial_profile=cas then enter commit as shown to

Chapter 2: Port Access and Configuration Examples 256. Type set port_settings/ then press Tab to view the options for the Port_Settings paramet

26 Cyclades ACS 6000 Advanced Console Server Command Reference Guide

27CHAPTER3CLI Appliance Settings OptionsThis chapter describes the Appliance Settings options. Only administrators and authorized users can access the

28 Cyclades ACS 6000 Advanced Console Server Command Reference GuideSee Table 3.1 through Table 3.13 for options available at each level and th

Chapter 3: CLI Appliance Settings Options 29Appliance_Settings/Network1. Enter cd appliance_settings/network to navigate to the Network level.

InstructionsThis symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literatur

30 Cyclades ACS 6000 Advanced Console Server Command Reference Guide[X] enable_ipv6 (enabled by default)[ ] get_dns_from_dhcpv6[ ] get_domain

Chapter 3: CLI Appliance Settings Options 31mask: nnn.nnn.nnn.nnn( ) ipv4_unconfigured( ) ipv6_method (*) stateless( ) dhcpv6( ) static( ) addr

32 Cyclades ACS 6000 Advanced Console Server Command Reference GuideIPv6IPv4 addresses are always enabled. An administrator can also enable IPv

Chapter 3: CLI Appliance Settings Options 33--:- settings cli-> showHostsThe following procedure describes how to add a host to the hosts ta

34 Cyclades ACS 6000 Advanced Console Server Command Reference Guide alias: 127.0.0.1/add 172.26.31.164/7. Enter cd <IP_address>

Chapter 3: CLI Appliance Settings Options 35 ( ) static address = prefix_length = gateway = (

36 Cyclades ACS 6000 Advanced Console Server Command Reference GuideAppliance_Settings/PortsEnter cd appliance_settings/ports to navigate to th

Chapter 3: CLI Appliance Settings Options 37To enable and assign the Serial profile to a serial port:1. Enter cd appliance_settings/ports/physi

38 Cyclades ACS 6000 Advanced Console Server Command Reference Guide--:- port_settings cli-> set port_settings/ status=enabled serial_profi

Chapter 3: CLI Appliance Settings Options 39--:- units cli-> cd appliance_settings/ports/dial-in_profile-or---:- units cli-> cd appliance

iiiTable of ContentsList of Tables...v

40 Cyclades ACS 6000 Advanced Console Server Command Reference GuideAppliance_Settings/AuthenticationEnter cd appliance_settings/authentication

Chapter 3: CLI Appliance Settings Options 41Appliance_Settings/UsersEnter cd appliance_settings/users to navigate to the users level.--:- Units

42 Cyclades ACS 6000 Advanced Console Server Command Reference Guide--:- user_names cli-> add --:#- [user_name] cli-> set user_informatio

Chapter 3: CLI Appliance Settings Options 43NOTE: To set a rule, you must enable the interface, set the rule for the interface and physically c

44 Cyclades ACS 6000 Advanced Console Server Command Reference GuideAppliance_Settings/SNMPEnter cd appliance_settings/snmp to navigate to the

Chapter 3: CLI Appliance Settings Options 45Appliance_Settings/Date and TimeEnter cd appliance_settings/date_and_time to navigate to the date_a

46 Cyclades ACS 6000 Advanced Console Server Command Reference GuideAppliance_Settings/Boot ConfigurationEnter cd appliance_settings/boot_confi

Chapter 3: CLI Appliance Settings Options 47Appliance_Settings/Online HelpEnter cd appliance_settings/online_help to navigate to the online_hel

48 Cyclades ACS 6000 Advanced Console Server Command Reference Guide

49CHAPTER4CLI Overview, Information, Active Sessions and Power Management OptionsThis section provides procedures for some tasks that the administrato

iv Cyclades ACS 6000 Advanced Console Server Command Reference Guidekilluser ...

50 Cyclades ACS 6000 Advanced Console Server Command Reference GuideInformation OptionsTo view and perform Information options:1. Log onto the

Chapter 4: CLI Overview, Information, Active Sessions and Power Management Options 513. Enter cd <navigation option from list> to view an

52 Cyclades ACS 6000 Advanced Console Server Command Reference Guideinactive Size: 83344 kBmapped Size: 14844 kBmemfree Size: 119404 kBmemtotal

Chapter 4: CLI Overview, Information, Active Sessions and Power Management Options 53Active Sessions InformationThe Active Session information

54 Cyclades ACS 6000 Advanced Console Server Command Reference Guide--:- active_sessions cli-> kill 37Power Management OptionsThe Power Mana

55AppendicesAppendix A: Enabling Firmware Upgrades When the Boot Image is not in FlashTo enable firmware upgrades when the boot image is not in Flash:

56 Cyclades ACS 6000 Advanced Console Server Command Reference GuideAppendix B: Technical SupportOur Technical Support staff is ready to assist

57INDEXIndexAaccess options (CLI) 3add command 7Appliance Settings options 27autocompletion 5AUX/Modem portconfigure 19enable 38CCAS Profile 20, 22cd

58 Cyclades ACS 6000 Advanced Console Server Command Reference Guideon command 12opiepasswd command 13outlet groups 54Overview options 49Pparam

FCC Warning StatementThe Cyclades ACS advanced console server has been tested and found to comply with the limits for Class A digital devices, pursuan

Table of Contents vOverview Options ...

For Technical Support:www.avocent.com/support590-770-501B Cyclades® ACS 6000Installation/Administration/User Guide

vi Cyclades ACS 6000 Advanced Console Server Command Reference Guide

viiList of TablesTable 1.1: ACS 6000 Advanced Console Server Port Descriptions.............2Table 2.1: Port Acce