Avocent MERGEPOINT 53XX SP MANAGER Guia do Utilizador descarregar pdf (Página 147)

ERR No such file or directory

cli> get network hosts 192.168.160.222

name fruitbat

alias

set

The set command sets the value(s) of the last parameter. When multiple parameters are

specified in one command, either all are set successfully or none of the values are changed.

The set command is used to set an existing value, in contrast to add command which is used to

add something to the parameter tree. For example, this set command is used to specify the IP

address for an Ethernet interface which already is identified by the eth0 parameter in the

parameter tree: set network interface eth0 address <IPaddress>. In contrast, new hosts need to be

added with the add command before their parameters can be specified; add network hosts

<IPaddress> makes an entry for a host with the specified IP address in the hosts list. Parameters

for this new host can then be changed with the set command: set network hosts <IPaddress>

name <hostname>.

Synopsis

set parameter(s) value(s)

Examples

cli> set network resolv dns0 10.0.0.1

cli> set network interface eth1 address 10.0.0.3 netmask 255.255.255.0

broadcast 10.0.0.255

shell

The shell command escapes to the shell.

Synopsis

shell

Examples

cli> shell

root@MergePoint:~#

root@MergePoint:~# whoami

root

root@MergePoint:~# logout

cli>

Chapter 7: Using the CLI Utility 135

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 235 236

Sem comentários

Avocent MERGEPOINT 53XX SP MANAGER Guia do Utilizador Página 147