Avocent Access Router Cyclades-PR2000 Manual do Utilizador descarregar pdf (Página 29)

Cyclades-PR2000

29Chapter 4 - Step-by-Step Instructions

STEP TWO

No more parameters are necessary for the Ethernet interface. The other interface to be configured is the

SWAN in slot 1. The SWAN physical media parameters are shown in Figure 4.11. Fill in the values for your

application. The SWAN configuration is described in more detail in chapter 6 of the Installation Manual.

CONFIG=>INTERFACE=>SWAN=>PHYSICAL

Parameter Example Your Application

Mode Synchronous.

Clock Source When the interface is connected to a

DSU/CSU, the

Clock Source

External

Media for SWAN Cable V.35 in the example because the DSU/CSU

is V.35. The type of cable is detected by the

router, so if the correct cable is connected to

the DSU/CSU the router will choose this

value as the default.

FIGURE 4.11 SWAN PHYSICAL MENU PARAMETERS

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 135 136

Sem comentários

Avocent Access Router Cyclades-PR2000 Manual do Utilizador Página 29