Avocent AMX5000 Guia do Utilizador descarregar pdf (Página 51)

Chapter 3: Operations 39

Setting a target flag

After a connection is made to a target device, a target flag will appear briefly on screen and display

the name or UID of the selected target device. Each user can configure the target flag settings

according to his or her preference.

To configure the target flag:

1. Press

Ctrl+Ctrl to launch the OSCAR interface.

2. Click the User

tab. The User screen displays.

3. Click the down arrow button to display the Target Flag screen.

Figure 3.6: Target Flag Screen

4. Configure the target flag settings as needed.

a. To set information – Select Name to display the connected target device

name on the

target flag.

-or-

Select UID

to display the connected target device UID on the target flag.

b. To set the text color – Select the text color for the target flag from the Text drop-down list.

c. To set the background color – Select the backgroun

d color for the target flag from the

Background drop-down list.

d. To set display properties – If you want the target flag to be displayed, select Displayed. If

you

do not want the target flag to be displayed, clear the Displayed checkbox.

e. To set display time – If you want the target flag to be displayed for a certain amount of

time, select Timed

and type the desired target flag duration between 3 and 99 seconds.

-or-

If you want the target flag to flash briefly on screen, clear the Timed checkbox. The target

flag will

appear for less than three seconds.

AMX.book Page 39 Thursday, June 12, 2008 4:14 PM

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 247 248

Sem comentários

Avocent AMX5000 Guia do Utilizador Página 51