Avocent AMX Switch Series Guia do Utilizador descarregar pdf (Página 57)

Chapter 5: Terminal Operations 47

To configure SNMP processing:

1. On the Serial Console Main Menu, press 4 to select SNMP Configuration. The SNMP

Configuration Menu displays.

2. Press 1 and Enter to toggle the SNMP mode from Disabled to Enabled.

3. Press 2 and Enter to specify the community to which traps will be read. Enter the community

name and

Enter.

4. Press 3 and Enter to specify the community name to which traps will be written. Enter the

community name and press

Enter.

5. Press 4 and Enter to specify the trap community name. Enter the trap community name and

press

Enter.

NOTE: The read, write and trap community names must match those used by the SNMP Browser/Trap Logger.

6. Press 5, 6, 7, 8 and Enter to specify each trap IP address of up to four trap hosts to which you

want to send SNMP traps. Type each trap IP address and press

Enter.

NOTE: The trap destination address must take the format of a decimal IP address as follows: xxx.xxx.xxx.xxx

7. Press 9 and Enter to display the SNMP Trap Configuration Menu. Press the number of each

SNMP trap you wish to enable or disable and

Enter.

8. Press 0 and Enter to apply and store all changes.

- or -

Press x and Enter to restore settings as they were before changes were made.

See To add a user and Forcing an internal switch in Chapter 4 for information on adding an SNMP

user and assigning rights to the SNMP user.

Managing AMX switch objects with SNMP

Using SNMP, you can monitor and manage MIB (Management Information Base) objects specific

to the AMX5000 and AMX5010 switch. Refer to Table 5.2 for a description of the AMX system

MIB object groups.

Table 5.2: AMX System MIB Object Groups

Object Group Purpose

amxAppliance

Provides general information about the AMX switch, including firmware and

hardware revisions

amxAmiq Provides a list of available AMIQ modules from the AMX5000 or AMX5010 switch

amxUserStation Provides a list of user stations connected to the AMX5000 or AMX5010 switch

amxStats Provides statistics on packets for each port (only available internally)

amxSnmp Provides information on SNMP settings.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 157 158

Sem comentários

Avocent AMX Switch Series Guia do Utilizador Página 57