Avocent ECMS2000U Guia do Utilizador descarregar pdf (Página 22)

16 Emerge Digital Extender System Installer/User Guide

To install the Emerge digital extender system on a network with the ECMS2000

user station:

1. With the ECMS2000 transmitter already connected to the remote workstation, connect it to the

LAN via the unit's RJ-45 connector.

2. Connect the ECMS2000 user station to the peripherals. Use UTP cable to connect the

ECMS2000 user station to the Ethernet network via the RJ-45 connector on the rear of the

ECMS2000 user station.

3. Turn on the ECMS2000 user station. A connection will be automatically established with the

remote workstation.

4. Use the serial menu to reconfigure the network settings for the ECMS2000 transmitter.

NOTE: If the ECMS2000 user station and ECMS2000 transmitter are to be located on different subnets,

configure their network settings before you connect to the network.

NOTE: If there are already ECMS2000 transmitter and ECMS2000 user station pairs operating on the subnet,

configure network settings of new ECMS2000 transmitter and ECMS2000 user station pairs before connecting

them to the network.

5. Use the serial menu to reconfigure the network settings for the ECMS2000 user station.

6. Repeat this procedure for each ECMS2000 transmitter and ECMS2000 user station pair you

wish to install on the network.

To install the Emerge digital extender system on a network in Desktop Mode:

1. Ensure that each ECMS2000 transmitter and ECMS2000 user station has a unique IP address.

2. Using the DM2000 Manager appliance, locate and add the units to the DM2000 Manager

appliance database. For information on how to do this, refer to the Emerge

DM2000 Manager

Installer/User Guide.

Table 2.5: Default Network Settings (ECMS2000 User Station)

Component IP Address Type

Default

Gateway Subnet Mask

ECMS2000

User Station

192.168.13.1 Static 0.0.0.0 255.255.255.0

ECMS2000

Transmitter

192.168.13.2 Static 0.0.0.0 255.255.255.0

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 91 92

Sem comentários

Avocent ECMS2000U Guia do Utilizador Página 22