Avocent PM3000 Guia do Utilizador descarregar pdf (Página 64)

Example:

opiepasswd -f -c teste

Adding teste:

Only use this method from the console; NEVER from remote. If you are

using telnet, xterm, or a dial-in, type ^C now or exit with no password.

Then run opiepasswd without the -c parameter.

Using MD5 to compute responses.

Enter new secret pass phrase:

Again new secret pass phrase:

ID teste OTP key is 499 AC0241

FOOD HUGH SKI ALMA LURK BRAD

CLI Equivalent Actions to Web Manager Checkbox Selection

NOTE: The following example procedure, which configures IPv6, illustrates the actions to use in the CLI to enable

or disable an option when a checkbox would be selected or deselected in the web manager.

To configure IPv6 (example of how to perform the equivalent of web manager

checkbox selection/deselection):

1. Log into the CLI and type cd network/settings.

--:- / cli-> cd network/settings

2. Type show to view the status of IPv6 configuration.

--:- settings cli-> show

hostname = PM1000-24-1024000004

primary_dns = 172.26.29.4

secondary_dns =

domain = corp.avocent.com

enable_ipv6 = yes

get_dns_from_dhcpv6 = no

get_domain_from_dhcpv6 = no

NOTE: At this location, you can use '=' to change the value or '/' to select a parameter inside the section.

3. Type set enable_ipv6= and press Tab to view the options for the parameter.

--:- ipv6 cli-> set enable_ipv6=<Tab>

no yes

4. Type set enable_ipv6: and press Tab to view the child parameters.

--:- ipv6 cli-> set enable_ipv6/<Tab>

get_dns_from_dhcpv6= get_domain_from_dhcpv6=

56 Avocent PMPDU Installer/User Guide

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 116 117

Sem comentários

Avocent PM3000 Guia do Utilizador Página 64